| HKM-VH300 |
|
| 主要規格 Major Specification: mm |
| 工作台尺寸 Worktable Dimensions: 1300x300
mm |
| 左右x前後x上下行程Stroke (Left-Right,
Front-Rear, Up-Down): 1000x360x500mm |
| 左右進給Left-Right Feeding: 12段,
15-700mm/min |
| 左右x上下快移速率Left-Right,
Up-Down Fast Moving Speed: 3000x800mm/min |
立主軸轉速Vertical
Shaft Rotation: 16段，65-3580rpm
|
| 立主軸端孔錐度Vertical
Shaft End-Hole Taper: NST40 |
| 立主軸端至工作台面之距離the distance between
the vertical shaft and the worktable: 100-650mm |
| 立主軸心至機身之距離the distance between
the center of the vertical shaft and the machine surface: 170-670mm |
| 橫主軸轉速Horizontal Shaft Rotation: 9段，85-1300rpm |
| 橫主軸錐度Horizontal Shaft Taper: NST40 |
| 橫主軸心至工作台面之距離the distance between
the center of the horizontal shaft and the worktable: 0-500mm |
| 橫主軸心至伸臂下端之距離the distance between
the center of horizontal shaft and the lower end of the
arm: 170mm |
| 立主軸馬達Vertical Shaft Motor: 3HP-2P/3HP-4P |
| 橫主軸馬達Horizonal Shaft Motor: 5HP-4P |
| 冷卻泵浦The cooling pump river bank: 1/6HP |
| 裝箱重量Pack the weight: 300KGS |
| 裝箱尺寸L*W*H Packing Measurement: 1672x2000x2465mm |
