| HKM-VH260 |
|
| 主要規格 Major Specification: mm |
| 工作台尺寸 Worktable Dimensions: 1200x260
mm |
| 左右x前後x上下行程Stroke (Left-Right,
Front-Rear, Up-Down): 800x300x450mm |
| 左右進給Left-Right Feeding: 12段31-435mm/min |
立主軸轉速Vertical
Shaft Rotation: 16段，65-3580rpm
|
| 立主軸端孔錐度Vertical
Shaft End-Hole Taper: NST40 |
| 立主軸端至工作台面之距離the distance between
the vertical shaft and the worktable: 100-550mm |
| 立主軸心至機身之距離the distance between
the center of the vertical shaft and the machine surface: 160-620mm |
| 橫主軸轉速Horizontal Shaft Rotation: 9段，70-1020rpm |
| 橫主軸錐度Horizontal Shaft Taper: NST40 |
| 橫主軸心至工作台面之距離the distance between
the center of the horizontal shaft and the worktable: 0-450mm |
| 橫主軸心至伸臂下端之距離the distance between
the center of horizontal shaft and the lower end of the
arm: 170mm |
| 立主軸馬達Vertical Shaft Motor: 3HP-2P/3HP-4P |
| 橫主軸馬達Horizonal Shaft Motor: 5HP-4P |
