| HKM-VH230 |
|
| 主要規格 Major Specification: mm |
| 工作台尺寸 Worktable Dimensions: 1050x230 |
| 左右x前後x上下行程Stroke (Left-Right,
Front-Rear, Up-Down): 650x300x425
mm |
| 左右進給Left-Right Feeding: 12段31-435mm/min |
| 左右x上下快移速率Left-Right, Up-Down
Fast Moving Speed: 2160x800mm/min |
立主軸轉速Vertical
Shaft Rotation: 6段，250-3150rpm
|
| 立主軸端孔錐度Vertical
Shaft End-Hole Taper: NST40 |
| 立主軸端至工作台面之距離the distance between
the vertical shaft and the worktable: 0-370mm |
| 立主軸心至機身之距離the distance between
the center of the vertical shaft and the machine surface: 250mm |
| 橫主軸轉速Horizontal Shaft Rotation: 6段，55-1225rpm |
| 橫主軸錐度Horizontal Shaft Taper: NST40 |
| 橫主軸心至工作台面之距離the distance between
the center of the horizontal shaft and the worktable: 0-425mm |
| 橫主軸心至伸臂下端之距離the distance between
the center of horizontal shaft and the lower end of the
arm: 135mm |
| 立主軸馬達Vertical Shaft Motor: 2HP-4P/1HP-8P |
| 橫主軸馬達Horizonal Shaft Motor: 2HP-4P |
