Vertical Dual Purpose Miller (x axis POWERFEED Feeding)
主要規格 Major Specification: mm
工作台尺寸 Worktable Dimensions: 1000x230
左右行程 Longitudinal Travel: 450
前後行程 Cross Travel: 230

上下行程 Vertical Travel: 320

工作台進刀方式 XYZFeed mode:X Powerfeed YZ 手動
立軸轉速,段數 Vertical spindle RPM, Steps(60HZ): 70~5440 RPM ,16 段
立軸錐孔 Vertical spindle taper: NT30
立軸變速範圍 (60HZ) Speed Range of Vertical Axle: 70~5440 RPM
立主軸端面至工作台面距離Spindle nose to table surface:40-359
立主軸中心至機身面距離Spindle center to column surface: 150-500
立銑頭通心軸行程Quill Travel: 120
立銑頭左右傾斜角度Swivel of Head: ±45°
橫軸轉速,段數 RPM, Steps(60HZ): 76-1130 RPM, 6 段Steps
橫軸錐孔 Horizontal spindle taper: NT30
橫主軸中心至伸出臂面距離Horizontal spindle center to over arm bottom: 130
橫主軸中心至工作台面距離Horizontal spindle center to table surface: 44-364
橫主軸最大刀具直徑Horizontal max tool diameter: O250
立主軸馬達 Vertical motor:3HP
橫主軸馬達 Horizontal motor:2HP
冷卻系統Coolant pump:1/8HP
機械重量(淨重)Net weight:1000kgs

機床規格尚有Available Specifications
HKM-VH-1 立臥兩用銑床 Vertical-Horizontal Miller
HKM-VH-1-XP 立臥兩用左右POWERFEED銑床 Vertical-Horizontal x axis POWERFEED Miller
HKM-VH-1-XHP 立臥兩用左右強力進給銑床 Vertical-Horizontal x axis Powerful Feeding Miller
HKM-VH-1-HX 立臥兩用左右油壓進給銑床 Vertical-Horizontal x axis Hydraulic Feeding Miller
HKM-VH-1-HX(V) 立臥兩用左右虎鉗油壓進給銑床 Vertical-Horizontal x axis Vise Hydraulic Feeding Miller
*以上機種伺服數控另議 * The above models with servo digital control will be alternatives.
We reserve the right to modify the structures, functions, dimensions, specifications, and appearances of the machine design without otherwise notifying.
1. 橫銑採高剛性齒輪設計,模數2.5厚度20㎜,並經熱處理研磨,精度高,噪音小,刀桿扥架採針狀軸承支撐,同心度佳,除低速重切削外,尚可高速高馬力之軟金屬重切削,如銅鋁、材質之散熱片切削。
The design for horizontal milling adopts high-rigid gears with module number 2.5 and thickness 20 mm processed with heat treatment, which is provided with high precision and low noise. Supported by the needle bearing, the spindle bracket is provided with excellent concentricity. In addition to heavy whittling with low speed, it can also be used on the soft metal heavy whittling with high speed and high power, such as whittling the thermal foils made of copper, aluminum, and similar materials.
2. 立銑頭主軸材質採SCM4,主軸套管鍍硬烙,經嚴謹精密研磨加工處理製造、主軸軸承經間隙消除調整組裝,確保主軸穩固精度。可手動、微調及自動進給,適用於鉆、銑、搪等綜合加工之切削。
The vertical milling spindle is made of SCM4 with the sleeve plated with HCr. The worm gears and various copper parts are made of phosphor bronze with strictly accurate grinding. The spindle bearing is assembled and adjusted with clearance eliminating to ensure the spindle's rigid precision, applicable to various machining processes, such as drilling, milling, and boring with manual, trimming, and automatic feeding.
3. 機台為FC-25鑄件,經調質與殘留應力消除處理,台面並具硬化處理研磨,精度穩定,使用壽命長。
The worktable is made of casting FC-25 with heat treatment eliminating the residual stress, and the surface is processed with hardened treatment grinding, which is provided with a stable precision and a durable life.
4. 適合縫紉機、五金工具、鞋模、鐘錶、汽機車、電子、散熱片或其他金屬零件之加工。
Applicable to the machining for sewing machines, hardware tools, shoe's molding, timepieces, automobiles, electronics, thermal foils, or other metal parts.
5. 左右進刀方式:
HKM-VH-1-XP 工作台左右進給使用一般型走刀器
HKM-VH-1-XHP 工作台左右進給使用強力型走刀器
Left-Right Feeding:
HK-VH-1-HXV work table is designed for automatic feeding. The piping is arranged neat and tidy, easy to clean debris. The main shaft, work table, jig, and cooling are designed for partial or overall start-stop, with high safety and easy operation. One person can operate several machines. The speed for feeding and retrieving tools is fast, saving man-hours, raising productivity, and lowering costs.
ZGM-VH-1-XP Work Table Left-Right Normal Feeding Tool
ZGM-VH-1-XHP Work Table Left-Right Powerful Feeding Tool